_SECTION_BEGIN("Candle");
SetBarsRequired(200,0);
GraphXSpace = 5;
SetChartOptions(0,chartShowArrows|chartShowDates);
k = Optimize("K",Param("K",1,0.25,5,0.25),0.25,5,0.25);
Per= Optimize("atr",Param("atr",4,3,20,1),3,20,1);
HACLOSE=(O+H+L+C)/4;
HaOpen = AMA( Ref( HaClose, -1 ), 0.5 );
HaHigh = Max( H, Max( HaClose, HaOpen ) );
HaLow = Min( L, Min( HaClose, HaOpen ) );
PlotOHLC( HaOpen, HaHigh, HaLow, HaClose, "" + Name(), colorBlack, styleCandle | styleNoLabel );
j=Haclose;
_SECTION_END();
_SECTION_BEGIN("Advanced Support & Resistance");
SetChartOptions(0,chartShowArrows|chartShowDates);
_N(Title = StrFormat("{{NAME}} - {{INTERVAL}} {{DATE}} ,{{VALUES}}", O, H, L, C, SelectedValue( ROC( C, 1 ) ) ));
//Plot(C, "", IIf(O>=C, colorRed, colorBlue),styleCandle);
//SetChartBkGradientFill( ParamColor("Inner panel upper",colorBlack),ParamColor("Inner panel lower",colorBlack));
_N(Title = EncodeColor(colorWhite)+StrFormat(" {{NAME}} - {{INTERVAL}} {{DATE}} Open:%g, Close:%g ,{{VALUES}}",O,C ));
////////////////////////////////////////////////////////
//Plot(MA(C,15),"",colorViolet);
////////////////////////////////////////////////////////
per1=Param ("per1", 0.1,0.1,50,0.10);
per=per1;
x = Cum(1);
s1=L;
s11=H;
pS = TroughBars( s1, per, 1 ) == 0;
endt= SelectedValue(ValueWhen( pS, x, 1 ));
startt=SelectedValue(ValueWhen( pS, x, 2 ));
dtS =endt-startt;
endS = SelectedValue(ValueWhen( pS, s1, 1 ) );
startS = SelectedValue( ValueWhen( pS, s1, 1 ));
aS = (endS-startS)/dtS;
bS = endS;
trendlineS = aS * ( x -endt ) + bS;
g3= IIf(x>startt-10,trendlineS,-1e10);
//Plot(g3,"",colorRed,styleDots,styleThick);
Plot(g3,"",colorTeal,styleThick);
pR = PeakBars( s11, per, 1 ) == 0;
endt1= SelectedValue(ValueWhen( pR, x, 1 ));
startt1=SelectedValue(ValueWhen( pR, x, 2 ));
dtR =endt1-startt1;
endR = SelectedValue(ValueWhen( pR, s11, 1 ) );
startR = SelectedValue( ValueWhen( pR, s11, 1 ));
aR = (endR-startR)/dtR;
bR = endR;
trendlineR = aR * ( x -endt1 ) + bR;
g4= IIf(x>startT1-10,trendlineR,-1e10);
//Plot(g4,"",colorGreen,styleDots,styleThick);
Plot(g4,"",colorTeal,styleThick);
///////////////////////////////////////////////////////////////
perc=per1;
x=BarIndex();xx=SelectedValue(x);
t1=SelectedValue(ValueWhen(PeakBars(C,perc)==0,x)) ;
H1=SelectedValue(ValueWhen(PeakBars(C,perc)==0,C)) ;
t11=SelectedValue(ValueWhen(TroughBars(C,perc)==0, x));
H11=SelectedValue(ValueWhen(TroughBars(C,perc)==0, C));
g=t1>t11;
shape=IIf(g,shapeDownArrow*(x==t1),shapeUpArrow*(x ==t11));
Color=IIf(g,colorRed,colorGreen);
PlotShapes(shape,color);
//////////////////////////////////////////////////////////
per=per1;
x = Cum(1);
s1=C;
s11=C;
pS = TroughBars( s1, per, 1 ) == 0;
endt= SelectedValue(ValueWhen( pS, x, 1 ));
startt=SelectedValue(ValueWhen( pS, x, 2 ));
dtS =endt-startt;
endS = SelectedValue(ValueWhen( pS, s1, 1 ) );
startS = SelectedValue( ValueWhen( pS, s1, 2 ));
aS = (endS-startS)/dtS;
bS = endS;
trendlineS = aS * ( x -endt ) + bS;
g3= IIf(x>startt-10,trendlineS,-1e10);
Plot(g3,"",colorTeal,styleThick);
pR = PeakBars( s11, per, 1 ) == 0;
endt1= SelectedValue(ValueWhen( pR, x, 1 ));
startt1=SelectedValue(ValueWhen( pR, x, 2 ));
dtR =endt1-startt1;
endR = SelectedValue(ValueWhen( pR, s11, 1 ) );
startR = SelectedValue( ValueWhen( pR, s11, 2 ));
aR = (endR-startR)/dtR;
bR = endR;
trendlineR = aR * ( x -endt1 ) + bR;
g4= IIf(x>startT1-10,trendlineR,-1e10);
Plot(g4,"",colorTeal,styleThick);
_SECTION_END();
_SECTION_BEGIN("Volume");
Plot( Volume, _DEFAULT_NAME(), ParamColor("Color", colorBlue ), styleNoTitle | ParamStyle( "Style", styleHistogram | styleOwnScale | styleThick | styleNoLabel, maskHistogram ), 2 );
_SECTION_END();
_SECTION_BEGIN("Zig zag trend");
//z_ZigZagValid
// ******** CHARTING
Plot(MA(C,15),"",colorViolet);
per=Param ("per1", 0.325,0.1,50,0.10);
PercentChange = per;
mystartbar = SelectedValue(BarIndex()); // FOR GRAPHING
mystartbardate = LastValue(ValueWhen(mystartbar == BarIndex(), DateNum(),1));
InitialValue = LastValue(ValueWhen(mystartbardate == DateNum(), C , 1 ) ) ;
Temp1 = IIf(BarIndex() >= mystartbar, InitialValue, Null) ;
//Plot(Temp1, " ", colorBlack,styleLine);
//Plot((1+(LastValue(PercentChange)/100))*(Temp1), " ", colorRed, styleLine) ;
//Plot((1-(LastValue(PercentChange)/100))*(Temp1), " ", colorGreen, styleLine) ;
ZZ = Zig(C,LastValue(PercentChange)) ;
PivotLow = Ref(IIf(Ref(ROC(ZZ,1),-1) < 0 AND ROC(ZZ,1) > 0, 1, Null),1);
PivotHigh = Ref(IIf(Ref(ROC(ZZ,1),-1) > 0 AND ROC(ZZ,1) < 0, 1, Null),1);
//PlotShapes( shapeCircle*PivotLow, colorRed,0, L, -20) ;
//PlotShapes( shapeCircle*PivotHigh,colorGreen,0,H, 20) ;
Buy_Valid = IIf(C>(1+(LastValue(PercentChange)/100))*(ValueWhen(PivotLow, C,1))
AND ROC(ZZ,1) > 0,1,0);
Sell_Valid = IIf(C<(1-(LastValue(PercentChange)/100))*(ValueWhen(PivotHigh, C,1))
AND ROC(ZZ,1) < 0,1,0);
Buy_Valid = ExRem(Buy_Valid,Sell_Valid);
Sell_Valid = ExRem(Sell_Valid,Buy_Valid);
//PlotShapes( shapeUpArrow*Buy_Valid, colorRed,0, L, -20);
//PlotShapes( shapeDownArrow*Sell_Valid, colorGreen,0,H, -20) ;
BarColors =
IIf(BarsSince(Buy_Valid) < BarsSince(Sell_Valid)
AND BarsSince(Buy_Valid)!=0, colorGreen,
IIf(BarsSince(Sell_Valid) < BarsSince(Buy_Valid)
AND BarsSince(Sell_Valid)!=0, colorRed, colorDarkTeal));
//Plot(C, " ", BarColors, styleCandle ) ;
//Plot(ZZ," ", colorLightGrey,styleLine|styleThick);
//Plot(ZZ," ", BarColors,styleDots|styleLine);
Plot(ZZ," ", colorLightGrey,styleLine|styleNoLabel);
Plot(ZZ," ", BarColors,styleDots|styleLine|styleNoLabel);
Title = Name() + " " + Date() + WriteIf(PivotLow, " Up Pivot","")+WriteIf(PivotHigh," Down Pivot ","")+ WriteIf(Buy_Valid, " Buy Point ","") + WriteIf(Sell_Valid, " Sell Point ", "") ;
_SECTION_END();
//_SECTION_BEGIN("MACD Trend Bars");
//ShortPds = Param("Fast period", 12, 1, 50, 1 );
//LongPds = Param("Slow period", 26, 3, 50, 1 );
//aperiod = Param("Signal period", 9, 1, 30, 1 );
//ml = MACD( ShortPds, LongPds );
//sl = Signal(ShortPds, LongPds,aperiod);
//InsideMacd = (sl < Ref(sl , -1) AND
// ml > Ref(ml, -1)) OR
// (sl > Ref(sl , -1) AND
// ml < Ref(ml, -1));
//Color = IIf( InsideMacd, ParamColor("Inside bar", colorPlum), IIf(sl > ml, ParamColor("down bar", colorRed), ParamColor("up bar", colorGreen)));
//Plot(1, "", Color, styleOwnScale|styleArea|styleNoLabel, -0.5,100);
//_SECTION_END();
_SECTION_BEGIN("Trix bars");
// Trix Bars number
// Trix Bars number for each swing
periods = Param( "Periods", 9, 3, 13, 2 );
//periods = Param( "Periods", 5, 2, 200, 1 );
TrixOnClose = Trix( periods );
uptx = TrixOnClose >= Ref( TrixOnClose, -1 );
dntx = TrixOnClose <= Ref( TrixOnClose, -1 );
Peaktrix = TrixOnClose > Ref( TrixOnClose, -1 )AND TrixOnClose > Ref(TrixOnClose, 1 );
Troughtrix = TrixOnClose < Ref( TrixOnClose, -1 )AND TrixOnClose < Ref(TrixOnClose, 1 ) ;
BarsUp = BarsSince( dntx );
BarsDn = BarsSince( uptx );
Colortx = IIf( uptx , colorGreen, IIf( dntx , colorRed, colorGreen ) );
//Plot( TrixOnClose, "Trix (" + periods + ")" , Colortx, styleThick );
// Trix's ribbon
Ribbon = IIf( uptx , colorBrightGreen, IIf( dntx , colorRed, colorBrightGreen ));
Plot( 1, "", Ribbon , styleOwnScale | styleArea | styleNoLabel, 0, 100 );
_SECTION_END();
_SECTION_BEGIN("Indicatori");
// Supporto e Resistenza
p = (H+L+C)/3;
r1 = (2*p)-L;
s1 = (2*p)-H;
r2 = p +(r1 - s1);
s2 = p -(r2 - s1);
r3 = P + (r2 - s2);
s3 = p - (r3 - s2);
//TRIX
trx=0;
trxh = 0;
periods = Param( "Periods", 9, 3, 13, 2 );
//periods = Param( "Periods", 5, 2, 200, 1 );
trx=Trix(periods);
trxh=C/100;
//under study
tx=(Trix(3)*Trix(5)*Trix(7))/100;
tm=MA(tx,3);
Ch1=tx - tm;
//RSI & Zig Zag
p = Param("Periods", 14, 2, 200, 1 );
r = RSI( p );
ZZ = Zig(C,LastValue(PercentChange)) ;
PivotLow = Ref(IIf(Ref(ROC(ZZ,1),-1) < 0 AND ROC(ZZ,1) > 0, 1, Null),1);
PivotHigh = Ref(IIf(Ref(ROC(ZZ,1),-1) > 0 AND ROC(ZZ,1) < 0, 1, Null),1);
Title = EncodeColor(colorBrown)+ Name () + EncodeColor(colorBrown)+ Date () + EncodeColor(colorBrown)+"]"+"\n"+
EncodeColor(colorBlue)+"O: "+EncodeColor(colorBlue)+O+
EncodeColor(colorGreen)+" H: "+EncodeColor(colorGreen)+H+
EncodeColor(colorRed)+" L: "+EncodeColor(colorRed)+L+
EncodeColor(colorBlue)+" C: "+EncodeColor(colorBlue)+C+
EncodeColor(colorOrange)+" Vol:"+EncodeColor(colorOrange)+WriteVal(V,1,0)+"\n"+
//EncodeColor(colorGreen)+" s1 "+EncodeColor(colorGreen)+s1+"\n"+
//EncodeColor(colorGreen)+" s2 "+EncodeColor(colorGreen)+s2+"\n";
EncodeColor(colorGreen)+"S3 "+EncodeColor(colorGreen)+s3+
//EncodeColor(colorRed)+" r1 "+EncodeColor(colorRed)+r1+
//EncodeColor(colorRed)+" r2 "+EncodeColor(colorRed)+r2+
EncodeColor(colorRed)+" R3 "+EncodeColor(colorRed)+r3+"\n"+
EncodeColor(colorDarkBlue)+"TRIX: "+WriteIf(trx > Ref(trx ,-1) AND trx < trxh ,EncodeColor(colorRed)+" Buy ",WriteIf( trx < Ref(trx ,-1) AND trx < 0 ,EncodeColor(colorRed)+" Strong buy ",WriteIf( trx > Ref(trx ,-1) AND trx > trxh ,EncodeColor(colorGreen)+" strong sell ", EncodeColor(colorGreen)+" Sell " )))+
EncodeColor(colorDarkBlue)+WriteIf(trx > trxh OR trx < 0 ,EncodeColor(colorRed)+WriteVal(trx), EncodeColor(colorBlue)+WriteVal(trx))+"\n"+
EncodeColor(colorDarkBlue)+"RSI: "+ WriteIf(r > Ref(r ,-1) AND r < 30 AND r > 70 ,EncodeColor(colorRed)+" Buy ",WriteIf( r < Ref(r ,-1) AND r < 30 ,EncodeColor(colorRed)+" Strong buy ",WriteIf( r > Ref(r ,-1) AND r > 70 ,EncodeColor(colorGreen)+" Strong sell ", EncodeColor(colorGreen)+" Sell " )))+
EncodeColor(colorDarkBlue)+WriteIf(r > 70 OR r < 30 ,EncodeColor(colorRed)+WriteVal(r), EncodeColor(colorBlue)+WriteVal(r))+"\n"+
EncodeColor(colorDarkBlue)+"Zig Zag: "+ WriteIf(PivotLow, " line up","")+WriteIf(PivotHigh," line down ","")+ WriteIf(Buy_Valid, " buy point ","") + WriteIf(Sell_Valid, " sell point ", "");
//EncodeColor(colorPlum) + WriteIf(InsideMacd," ","" ) + EncodeColor(colorGreen) + WriteIf(sl>ml,"Rialzo","") + EncodeColor(colorRed) + WriteIf(sl<ml,"Ribasso","" );
Ribbon = IIf( uptx , colorBrightGreen, IIf( dntx , colorRed, colorBrightGreen ));
Plot( 1, "", Ribbon , styleOwnScale | styleArea | styleNoLabel, 0, 100 );
//Color = IIf( InsideMacd, ParamColor("Inside bar", colorPlum), IIf(sl > ml, ParamColor("down bar", colorRed), ParamColor("up bar", colorGreen)));
//Plot(1, "", Color, styleOwnScale|styleArea|styleNoLabel, -0.5,100);
//EncodeColor(colorPlum) + WriteIf(TSU,"tendenza al rialzo","" ) + EncodeColor(colorIndigo) + WriteIf(TSD,"tendenza al ribasso","" )+"\n"+
_SECTION_END();
_SECTION_BEGIN("Trend mobile");
N = 30; // Periodo - in questo caso un mese ma si pu? fare una settimana, 1 ora, 15 minuti, ecc...
Start = 1;
X = Cum(Start); // Set up the x cordinate array of the Linear Regression Line
Y = Avg; // Set the y co-ordinate of the Linear Regression line
/* Calculate the slope (bconst) AND the y intercept (aconst) of the line */
SUMX = LastValue(Sum(X,N));
SUMY = LastValue(Sum(Y,N));
SUMXY = LastValue(Sum(X*Y,N));
SUMXSqd = LastValue(Sum(X*X,N));
SUMSqdX = LastValue(SUMX * SUMX);
bconst = (N * SUMXY - SUMX * SUMY)/(N * SUMXSqd - SUMSqdX);
aconst = (SUMY - bconst * (SUMX))/N;
/* Force the x value to be very negative so the graph does not apear before the lookback period */
Domain = IIf ( X > LastValue(X) - N, 1 , -1e10);
Xvar = X * Domain;
/* Linear Regression Line */
Yvar = aconst + bconst * Xvar;
/* Plot the graphs */
/* Linear Regression Lines */
Colore=colorBlue;
//Plot(Yvar,"Pivot",colorWhite);
Plot(Yvar + LastValue(StDev(High,N))," trend_up",colorBlue);
Plot(Yvar - LastValue(StDev(Low,N))," trend_down",colorBlue);
_SECTION_END();
_SECTION_BEGIN("Parabolic Sar");
accel = Param("Acceleration", 0.02, 0, 1, 0.001);
mx = Param("Max. acceleration", 0.2, 0, 1, 0.001);
Psar = SAR(accel,mx);
colordots = IIf(Psar < L,colorGreen,IIf(Psar > H,colorRed,colorWhite));
Buy = Cross(C,Psar); Buy = Ref(Buy,-1); BuyPrice = L;
Sell = Cross(Psar,C); Sell = Ref(Sell,-1); SellPrice = H;
SetBarsRequired(-2,-2);
SetChartOptions(0, chartShowDates);
Plot(Psar ,"\nPsar",colordots,styleDots|styleNoLine);
//PlotShapes(IIf(Buy,shapeUpArrow,shapeNone),colorRed,0,L,-35);
//PlotShapes(IIf(Buy,shapeHollowUpArrow,shapeNone),colorRed,0,L,-35);
//PlotShapes(IIf(Buy,shapeHollowCircle,shapeNone),colorBlue,0,BuyPrice,0);
//PlotShapes(IIf(Sell,shapeDownArrow,shapeNone),colorBrightGreen,0,H,-35);
//PlotShapes(IIf(Sell,shapeHollowDownArrow,shapeNone),colorBrightGreen,0,H,-35);
//PlotShapes(IIf(Sell,shapeHollowCircle,shapeNone),colorOrange,0,SellPrice,0);
_SECTION_END();
_SECTION_BEGIN("Pivot");
nBars = Param("Number of bars", 30, 5, 40);
LP=Param("LookBack Period",250,1,500,1);
bShowTCZ = Param("Show TCZ", 0, 0, 1);
nExploreBarIdx = 0;
nExploreDate = 0;
nCurDateNum = 0;
DN = DateNum();
DT = DateTime();
bTCZLong = False;
bTCZShort = False;
nAnchorPivIdx = 0;
ADX14 = ADX(14);
if(Status("action")==1) {
bDraw = True;
bUseLastVis = 1;
} else {
bDraw = False;
bUseLastVis = False;
bTrace = 1;
nExploreDate = Status("rangetodate");
for (i=LastValue(BarIndex());i>=0;i--) {
nCurDateNum = DN[i];
if (nCurDateNum == nExploreDate) {
nExploreBarIdx = i;
}
}
}
GraphXSpace=7;
if (bDraw) {
}
aHPivs = H - H;
aLPivs = L - L;
aHPivHighs = H - H;
aLPivLows = L - L;
aHPivIdxs = H - H;
aLPivIdxs = L - L;
aAddedHPivs = H - H;
aAddedLPivs = L - L;
aLegVol = H - H;
aRetrcVol = H - H;
nHPivs = 0;
nLPivs = 0;
lastHPIdx = 0;
lastLPIdx = 0;
lastHPH = 0;
lastLPL = 0;
curPivBarIdx = 0;
aHHVBars = HHVBars(H, nBars);
aLLVBars = LLVBars(L, nBars);
aHHV = HHV(H, nBars);
aLLV = LLV(L, nBars);
nLastVisBar = LastValue(
Highest(IIf(Status("barvisible"), BarIndex(), 0)));
curBar = IIf(nlastVisBar > 0 AND bUseLastVis, nlastVisBar,
IIf(Status("action")==4 AND nExploreBarIdx > 0, nExploreBarIdx,
LastValue(BarIndex())));
curTrend = "";
if (aLLVBars[curBar] < aHHVBars[curBar])
curTrend = "D";
else
curTrend = "U";
if (curBar >= LP) {
for (i=0; i<LP; i++) {
curBar = IIf(nlastVisBar > 0 AND bUseLastVis,
nlastVisBar-i,
IIf(Status("action")==4 AND nExploreBarIdx > 0,
nExploreBarIdx-i,
LastValue(BarIndex())-i));
if (aLLVBars[curBar] < aHHVBars[curBar]) {
if (curTrend == "U") {
curTrend = "D";
curPivBarIdx = curBar - aLLVBars[curBar];
aLPivs[curPivBarIdx] = 1;
aLPivLows[nLPivs] = L[curPivBarIdx];
aLPivIdxs[nLPivs] = curPivBarIdx;
nLPivs++;
}
} else {
if (curTrend == "D") {
curTrend = "U";
curPivBarIdx = curBar - aHHVBars[curBar];
aHPivs[curPivBarIdx] = 1;
aHPivHighs[nHPivs] = H[curPivBarIdx];
aHPivIdxs[nHPivs] = curPivBarIdx;
nHPivs++;
}
}
}
}
curBar =
IIf(nlastVisBar > 0 AND bUseLastVis,
nlastVisBar,
IIf(Status("action")==4 AND nExploreBarIdx > 0,
nExploreBarIdx,
LastValue(BarIndex()))
);
if (nHPivs >= 2 AND nLPivs >= 2) {
lastLPIdx = aLPivIdxs[0];
lastLPL = aLPivLows[0];
lastHPIdx = aHPivIdxs[0];
lastHPH = aHPivHighs[0];
nLastHOrLPivIdx = Max(lastLPIdx, lastHPIdx);
nAddPivsRng = curBar - nLastHOrLPivIdx;
aLLVAfterLastPiv = LLV(L, nAddPivsRng);
nLLVAfterLastPiv = aLLVAfterLastPiv[curBar];
aLLVIdxAfterLastPiv = LLVBars(L, nAddPivsRng);
nLLVIdxAfterLastPiv = curBar - aLLVIdxAfterLastPiv[curBar];
aHHVAfterLastPiv = HHV(H, nAddPivsRng);
nHHVAfterLastPiv = aHHVAfterLastPiv[curBar];
aHHVIdxAfterLastPiv = HHVBars(H, nAddPivsRng);
nHHVIdxAfterLastPiv = curBar - aHHVIdxAfterLastPiv[curBar];
if (lastHPIdx > lastLPIdx) {
/* There are at least two possibilities here. One is that
the previous high was higher, indicating that this is a
possible short retracement or one in the making.
The other is that the previous high was lower, indicating
that this is a possible long retracement in the working.
However, both depend on opposing pivots. E.g., if I find
higher highs, what if I have lower lows?
If the highs are descending, then I can consider:
- a lower low, and leave it at that
- a higher high and higher low
- a lower low and another lower high
*/
if (aHPivHighs[0] < aHPivHighs[1]) {
if (nLLVAfterLastPiv < aLPivLows[0] AND
(nLLVIdxAfterLastPiv - lastHPIdx - 1) >= 1
AND nLLVIdxAfterLastPiv != curBar ) {
// -- OK, we'll add this as a pivot.
// Mark it for plotting...
aLPivs[nLLVIdxAfterLastPiv] = 1;
aAddedLPivs[nLLVIdxAfterLastPiv] = 1;
// ...and then rearrange s in the
// pivot information arrays
for (j=0; j<nLPivs; j++) {
aLPivLows[nLPivs-j] = aLPivLows[nLPivs-(j+1)];
aLPivIdxs[nLPivs-j] = aLPivIdxs[nLPivs-(j+1)];
}
aLPivLows[0] = nLLVAfterLastPiv;
aLPivIdxs[0] = nLLVIdxAfterLastPiv;
nLPivs++;
// -- Test whether to add piv given last piv is high
// AND we have lower highs
}
// -- Here, the last piv is a high piv, and we have
// higher-highs. The most likely addition is a
// Low piv that is a retracement.
} else {
if (nLLVAfterLastPiv > aLPivLows[0] AND
(nLLVIdxAfterLastPiv - lastHPIdx - 1) >= 1
AND nLLVIdxAfterLastPiv != curBar ) {
// -- OK, we'll add this as a pivot.
// Mark it for plotting...
aLPivs[nLLVIdxAfterLastPiv] = 1;
aAddedLPivs[nLLVIdxAfterLastPiv] = 1;
// ...and then rearrange s in the
// pivot information arrays
for (j=0; j<nLPivs; j++) {
aLPivLows[nLPivs-j] = aLPivLows[nLPivs-(j+1)];
aLPivIdxs[nLPivs-j] = aLPivIdxs[nLPivs-(j+1)];
}
aLPivLows[0] = nLLVAfterLastPiv;
aLPivIdxs[0] = nLLVIdxAfterLastPiv;
nLPivs++;
// -- Test whether to add piv given last piv is high
// AND we have lower highs
}
// -- The last piv is a high and we have higher highs
// OR lower highs
}
/* ****************************************************************
Still finding missed pivot(s). Here, the last piv is a low piv.
**************************************************************** */
} else {
// -- First case, lower highs
if (aHPivHighs[0] < aHPivHighs[1]) {
if (nHHVAfterLastPiv < aHPivHighs[0] AND
(nHHVIdxAfterLastPiv - lastLPIdx - 1) >= 1
AND nHHVIdxAfterLastPiv != curBar ) {
// -- OK, we'll add this as a pivot.
// Mark that for plotting
aHPivs[nHHVIdxAfterLastPiv] = 1;
aAddedHPivs[nHHVIdxAfterLastPiv] = 1;
// ...and then rearrange s in the
// pivot information arrays
for (j=0; j<nHPivs; j++) {
aHPivHighs[nHPivs-j] = aHPivHighs[nHPivs-(j+1)];
aHPivIdxs[nHPivs-j] = aHPivIdxs[nhPivs-(j+1)];
}
aHPivHighs[0] = nHHVAfterLastPiv;
aHPivIdxs[0] = nHHVIdxAfterLastPiv;
nHPivs++;
// -- Test whether to add piv given last piv is high
// AND we have lower highs
}
// -- Second case when last piv is a low piv, higher highs
// Most likely addition is high piv that is a retracement.
// Considering adding a high piv as long as it is higher
} else {
// -- Where I have higher highs,
if (nHHVAfterLastPiv > aHPivHighs[0] AND
(nHHVIdxAfterLastPiv - lastLPIdx - 1) >= 1
AND nHHVIdxAfterLastPiv != curBar ) {
// -- OK, we'll add this as a pivot.
// Mark it for plotting...
aHPivs[nHHVIdxAfterLastPiv] = 1;
aAddedHPivs[nHHVIdxAfterLastPiv] = 1;
// ...and then rearrange s in the
// pivot information arrays
for (j=0; j<nHPivs; j++) {
aHPivHighs[nHPivs-j] = aHPivHighs[nHPivs-(j+1)];
aHPivIdxs[nHPivs-j] = aHPivIdxs[nhPivs-(j+1)];
}
aHPivHighs[0] = nHHVAfterLastPiv;
aHPivIdxs[0] = nHHVIdxAfterLastPiv;
nHPivs++;
// -- Test whether to add piv given last piv is high
// AND we have lower highs
}
}
}
// -- If there are at least two of each
}
/* ****************************************
// -- Done with finding pivots
***************************************** */
if (bDraw) {
// -- OK, let's plot the pivots using arrows
PlotShapes( IIf(aHPivs==1, shapeSmallSquare, shapeNone), colorCustom12, layer = 0, yposition = High, offset = 9);
PlotShapes( IIf(aHPivs==1, shapeSmallSquare, shapeNone), colorBlack, layer = 0, yposition = High, offset = 12);
PlotShapes( IIf(aAddedHPivs==1, shapeSmallSquare, shapeNone), colorCustom10,layer = 0, yposition = High, offset = 9);
PlotShapes( IIf(aAddedHPivs==1, shapeSmallSquare, shapeNone), colorBlack, layer = 0, yposition = High, offset = 12);
PlotShapes( IIf(aLPivs==1, shapeSmallSquare, shapeNone), colorBrightGreen, layer = 0, yposition = Low, offset = -9);
PlotShapes( IIf(aLPivs==1, shapeSmallSquare, shapeNone), colorBlack, layer = 0, yposition = Low, offset = -12);
PlotShapes( IIf(aAddedLPivs==1, shapeSmallSquare, shapeNone), colorYellow, layer = 0, yposition = Low, offset = -10);
PlotShapes( IIf(aAddedLPivs==1, shapeSmallSquare, shapeNone), colorBlack, layer = 0, yposition = Low, offset = -13);
}
/* ****************************************
// -- Done with discovering and plotting pivots
***************************************** */
// -- I'm going to want to look for possible retracement
risk = 0;
profInc = 0;
nLeg0Pts = 0;
nLeg0Bars = 0;
nLeg0Vol = 0;
nLeg1Pts = 0;
nLeg1Bars = 0;
nLeg1Vol = 0;
nLegBarsDiff = 0;
nRtrc0Pts = 0;
nRtrc0Bars = 0;
nRtrc0Vol = 0;
nRtrc1Pts = 0;
nRtrc1Bars = 0;
nRtrc1Vol = 0;
minRtrc = 0;
maxRtrc = 0;
minLine = 0;
maxLine = 0;
triggerLine = 0;
firstProfitLine = 0;
triggerInc = 0;
triggerPrc = 0;
firstProfitPrc = 0;
retrcPrc = 0;
retrcBar = 0;
retrcBarIdx = 0;
retrcRng = 0;
aRetrcPrc = H-H;
aRetrcPrcBars = H-H;
aRetrcClose = C;
retrcClose = 0;
// -- Do TCZ calcs. Arrangement of pivs very specific
// for this setup.
if (nHPivs >= 2 AND
nLPivs >=2 AND
aHPivHighs[0] > aHPivHighs[1] AND
aLPivLows[0] > aLPivLows[1]) {
tcz500 =
(aHPivHighs[0] -
(.5 * (aHPivHighs[0] - aLPivLows[1])));
tcz618 =
(aHPivHighs[0] -
(.618 * (aHPivHighs[0] - aLPivLows[1])));
tcz786 =
(aHPivHighs[0] -
(.786 * (aHPivHighs[0] - aLPivLows[0])));
retrcRng = curBar - aHPivIdxs[0];
aRetrcPrc = LLV(L, retrcRng);
aRetrcPrcBars = LLVBars(L, retrcRng);
retrcPrc = aRetrcPrc[curBar];
retrcBarIdx = curBar - aRetrcPrcBars[curBar];
retrcClose = aRetrcClose[retrcBarIdx];
// -- bTCZLong setup?
bTCZLong = (
// -- Are retracement levels arranged in
// tcz order?
// .500 is above .786 for long setups
tcz500 >= (tcz786 * (1 - .005))
AND
// .681 is below .786 for long setups
tcz618 <= (tcz786 * (1 + .005))
AND
// -- Is the low in the tcz range
// -- Is the close >= low of tcz range
// and low <= high of tcz range
retrcClose >= ((1 - .01) * tcz618)
AND
retrcPrc <= ((1 + .01) * tcz500)
);
// -- risk would be high of signal bar minus low of zone
//risk = 0;
// -- lower highs and lower lows
} else if (nHPivs >= 2 AND nLPivs >=2
AND aHPivHighs[0] < aHPivHighs[1]
AND aLPivLows[0] < aLPivLows[1]) {
tcz500 =
(aHPivHighs[1] -
(.5 * (aHPivHighs[1] - aLPivLows[0])));
tcz618 =
(aHPivHighs[0] -
(.618 * (aHPivHighs[1] - aLPivLows[0])));
tcz786 =
(aHPivHighs[0] -
(.786 * (aHPivHighs[0] - aLPivLows[0])));
retrcRng = curBar - aLPivIdxs[0];
aRetrcPrc = HHV(H, retrcRng);
retrcPrc = aRetrcPrc[curBar];
aRetrcPrcBars = HHVBars(H, retrcRng);
retrcBarIdx = curBar - aRetrcPrcBars[curBar];
retrcClose = aRetrcClose[retrcBarIdx];
bTCZShort = (
// -- Are retracement levels arranged in
// tcz order?
// .500 is below .786 for short setups
tcz500 <= (tcz786 * (1 + .005))
AND
// .681 is above .786 for short setups
tcz618 >= (tcz786 * (1 - .005))
AND
// -- Is the close <= high of tcz range
// and high >= low of tcz range
retrcClose <= ((1 + .01) * tcz618)
AND
retrcPrc >= ((1 - .01) * tcz500)
);
// -- Risk would be top of zone - low of signal bar
//risk = 0;
}
// -- Show zone if present
if (bTCZShort OR bTCZLong) {
// -- Be prepared to see symmetry
if (bTCZShort) {
if (aLPivIdxs[0] > aHPivIdxs[0]) {
// -- Valuable, useful symmetry information
nRtrc0Pts = aHPivHighs[0] - aLPivLows[1];
nRtrc0Bars = aHPivIdxs[0] - aLPivIdxs[1] + 1;
nRtrc1Pts = retrcPrc - aLPivLows[0];
nRtrc1Bars = retrcBarIdx - aLPivIdxs[0] + 1;
} else {
nRtrc0Pts = aHPivHighs[1] - aLPivLows[1];
nRtrc0Bars = aHPivIdxs[1] - aLPivIdxs[1] + 1;
nRtrc1Pts = aHPivHighs[0] - aLPivLows[0];
nRtrc1Bars = aHPivIdxs[0] - aLPivIdxs[0] + 1;
}
} else { // bLongSetup
if (aLPivIdxs[0] > aHPivIdxs[0]) {
nRtrc0Pts = aHPivHighs[0] - aLPivLows[1];
nRtrc0Bars = aHPivIdxs[0] - aLPivIdxs[1] + 1;
nRtrc1Pts = retrcPrc - aLPivLows[0];
nRtrc1Bars = retrcBarIdx - aLPivIdxs[0] + 1;
} else {
nRtrc0Pts = aHPivHighs[1] - aLPivLows[0];
nRtrc0Bars = aLPivIdxs[0] - aHPivIdxs[1] + 1;
nRtrc1Pts = aHPivHighs[0] - aLPivLows[0];
nRtrc1Bars = aLPivIdxs[0] - aHPivIdxs[0] + 1;
}
}
if (bShowTCZ) {
Plot(
LineArray( IIf(bTCZLong, aHPivIdxs[0], aLPivIdxs[0]),
tcz500, curBar, tcz500 , 0),
"tcz500", colorPaleBlue, styleLine);
Plot(
LineArray( IIf(bTCZLong, aHPivIdxs[0], aLPivIdxs[0]),
tcz618, curBar, tcz618, 0),
"tcz618", colorPaleBlue, styleLine);
Plot(
LineArray( IIf(bTCZLong, aHPivIdxs[0], aLPivIdxs[0]),
tcz786, curBar, tcz786, 0),
"tcz786", colorTurquoise, styleLine);
}
// -- if (bShowTCZ)
}
// **************************
// END INDICATOR CODE
// **************************
_SECTION_END();
_SECTION_BEGIN("explorer");
fastmalenght=15;
slowmalength=30;
fastma=MA( C, fastmalenght );
slowma=MA( C, slowmalength );
eBuy=Cross( fastma , slowma );
xbuy=ADX()>10;
eSell=Cross( slowma , fastma );
Buy=eBuy AND xbuy;
/* exrem is one method to remove sur strade signals. It removes excessive signals of arrow */
Buy = ExRem(Buy, Sell);
Sell = ExRem(Sell, Buy);
ApplyStop(stopTypeLoss,stopModePercent,Optimize( "maX. loss stop level", 12, 2, 30, 1 ),True );
_SECTION_END();
_SECTION_BEGIN("Bollinger Bands");
P = ParamField("Price field",-1);
Periods = Param("Periods", 15, 2, 100, 1 );
Width = Param("Width", 2, 0, 10, 0.05 );
Color = ParamColor("Color", colorCycle );
Style = ParamStyle("Style");
//Plot( BBandTop( P, Periods, Width ), "BBup", colorCustom12, Style );
//Plot( BBandBot( P, Periods, Width ), "BBdown", colorCustom12, Style );
bb1col=IIf(BBandTop(C,15,2)>Ref(BBandTop(C,15,2),-1),colorLime,colorRed);
bb2col=IIf(BBandBot(C,15,2)>Ref(BBandBot(C,15,2),-1),colorLime,colorRed);
Plot( BBandTop( C, 15,2 ), "" , bb1col, styleThick );
Plot( BBandBot( C, 15,2 ), "" , bb2col, styleThick );
_SECTION_END();
_SECTION_BEGIN("Visible Max and Min");
//Plot( C, "Close", ParamColor("Color", colorBlack ), styleNoTitle |
//ParamStyle("Style") | GetPriceStyle() );
function VisibleMaxValue(Value)
{
BI = BarIndex();
FirstVisibleBarIndex = Status("FirstvisiblebarIndex");
FirstVisibleBar = FirstVisibleBarIndex == BI;
HighestVisibleValue_ = HighestSince(FirstVisibleBar, Value);
LastVisibleBarIndex = Status("LastvisiblebarIndex");
BlankBars = SelectedValue(LastVisibleBarIndex - BI);
LastVisibleBar = LastVisibleBarIndex == BI + BlankBars;
MaxValue = LastValue(ValueWhen(Lastvisiblebar, HighestVisibleValue_));
return MaxValue;
}
function VisibleMinValue(Value)
{
BI = BarIndex();
FirstVisibleBarIndex = Status("FirstvisiblebarIndex");
FirstVisibleBar = FirstVisibleBarIndex == BI;
LowestVisibleValue_ = LowestSince(FirstVisibleBar, Value);
LastVisibleBarIndex = Status("LastvisiblebarIndex");
BlankBars = SelectedValue(LastVisibleBarIndex - BI);
LastVisibleBar = LastVisibleBarIndex == BI + BlankBars;
MinValue = LastValue(ValueWhen(Lastvisiblebar, LowestVisibleValue_));
return MinValue;
}
Plot(VisibleMaxValue(High), "", colorTeal, 0);
Plot(VisibleMinValue(Low), "", colorTeal, 0);
_SECTION_END();
_SECTION_BEGIN("TrendChart");
//Coding by rmike Version 2.0 Based upon the work of Andrew cardwell
//Intellectual Copyright (for amibroker coding only) - rmike
//Works quite nicely with setting of 13 & higher on a weekly chart. For dail
// Intraday charts you will need to experiment with faster settings, the default of 9 is provided.
//You are free to distribute this chart afl with the proviso that it is not modified or edited
//in any way and is distributed with due acknowledgement/ reference to the original author.
pertrix = Param("period Trix", 9, 3, 13, 2 );
persig = Param("period signal", 5, 2, 200,1);
//p=Param("RSI Periods", 14, 2, 100,1);
//p=Param("RSI Periods", 9, 2, 100,1);
A=MA(C,15);
A1=MA(C,30);
//A=EMA(C,9);
//A1=WMA(C,45);
B=EMA(Trix(pertrix),9);
B1=WMA(Signal(persig),5);
TU=A>A1 AND B>B1;
TD=A<=A1 AND B<=B1;
TSU=A>A1 AND B<=B1;
TSD=A<=A1 AND B>B1;
_SECTION_END();
_SECTION_BEGIN("Super TEMA");
//Super TEMA by Cù Chulainn V1.0
n=25; Av=12; Av1=16; Av2=2; stp=2;
//n=15; Av=12; Av1=16; Av2=2; stp=2;
n = Optimize("Periods",n,2,30,1);
av = Optimize("Average",av,10,30,1);
av1 = Optimize("Average1",av1,10,30,1);
av2 = Optimize("Average2",av2,2,5,1);
stp = Optimize("Stop",stp,4,15,1);
Var1= TEMA(Close,n);
Var2= TEMA(var1,av);
Var3= (var1-var2)+var1;
Var1= TEMA(var3,av1);
Var4= MA((var1-var2)+var1,av2);
Var5=(Var1-Var2)+Var1;
Buy=Cover=Cross(Var5,Var4);
Sell=Short=Cross(Var4,VAR5);
Buy=Cover=Cross(Var5,Ref(Var5,-1));
Sell=Short=Cross(Ref(Var5,-1),VAR5);
Plot(Var5,"Super TEMA" + "("+WriteVal( n, 1.0 )+","+WriteVal(Av, 1.0 )+"," +WriteVal(Av1, 1.0 )+","+WriteVal(Av2, 1.0 )+")" ,IIf(Var5>Ref(Var5,-1),6,4));
Plot( Flip( Buy, Sell ), "Trade", colorLavender, styleArea | styleOwnScale, 0, 1 );
//Plot( Flip( Buy, Sell ), "Trade", colorPaleGreen, styleArea | styleOwnScale, 0, 1 );
_SECTION_END();
06-08-2010, 04:40 PM
تعليمات المشاركة
